If you own an old television and are having trouble watching digital broadcasts, you may need a digital converter box. The RCA digital TV converter and recorder is one of the best options available in the market. In this article, we will guide you through the process of setting up this converter box.
Before you start, make sure you have the following things:
– RCA digital TV converter and recorder
– Power cord
– Antenna cord
– HDMI or AV cable, or RF cable
– Television with HDMI, AV, or RF input
Once you have all these things, follow these steps:
1. Plug in the power cord into the DC import.
2. Connect the antenna cord to the port on the left side at the back of the box.
3. Choose from three cable connection options: HDMI, AV, or RF cable. HDMI will give you the highest quality, AV cables will give you a slightly lower quality, and the coaxial or RF cable will give you the lowest quality.
4. To connect your HDMI cable, insert your cable into the HDMI port and connect the other end to your television. Press the input or source button on your TV remote control and select HDMI. You can choose the resolution of your screen by repeatedly pressing the HDMI button on your remote to view the different options. 1080p is the highest resolution. The second way to change the resolution is by pressing the menu button, then using the arrows to select the picture icon and rotating through the options under resolution.
5. To connect your AV cables, match up the cables with the corresponding audio and video ports in the middle. The white and red cables are for sound, and the yellow is for video. Then connect the other end to your television. Select AV from your TV remote’s input or source button.
6. To connect your coaxial or RF cable, connect it to the output 2 TV port and secure the other end of the connection. Select TV or antenna from your TV remote’s input or source button. You can choose from two modulations by selecting the third icon channel search and selecting between channel 3 and 4 under modulation. Your television must also match up with the channel. For example, if you choose channel 3, your television should also be on channel 3.
7. If you want to bypass the antenna signal directly to your television, select the bypass option under modulation.
8. Once you have connected your cable of choice, plug the other end of your power cord to an outlet. Press the power button on the right side at the front or press down bar from the box’s remote control.
We hope this tutorial was helpful to you. For more information, visit support.rcaav.com. Now you can enjoy your favorite digital broadcasts on your old television without any hassle.