If you ever encounter any issues with your Oculus Quest 2, the manufacturer will most likely ask for the serial number of your headset or controllers for a replacement or repair. Finding the serial numbers is not as complicated as it may seem, and we’ll guide you through the process.
The serial number of an Oculus Quest 2 controller is located underneath a QR code. To reveal it, you’ll need to remove the battery cover. The cover can be removed by holding the controller and pulling the panel in the opposite direction of the button. The panel is removable, and there’s a small logo that indicates how to remove it. Once it’s open, remove the battery, and you’ll see the QR code with the serial number just below it. The other controller’s serial number can be found the same way by removing the panel on the opposite side.
Finding the serial number of the Oculus Quest 2 headset is a bit different. It’s located on the side with the strap, but it’s hard to see. To reveal it, you’ll need to remove the strap. Don’t worry; it’s not complicated. Hold the headset with one hand and use your thumb to push up on the plastic part that holds the strap while slightly twisting it. The clips will release, and you’ll be able to remove the plastic part, revealing the QR code and serial number underneath it.
Once you have the serial numbers, keep them in a safe place. If you ever need to contact Oculus for a replacement or repair, they will ask for them. Putting the battery cover and strap back in place is easy, so you don’t have to worry about damaging your device.
In conclusion, finding the serial numbers of your Oculus Quest 2 devices is easy and straightforward. By following the steps we provided, you can access the serial numbers of your controllers and headset without any problem. Remember that having your serial numbers ready will save you time if you ever need to contact Oculus for support.