How to Connect Ethernet Cable to HP Laptop: Step by Step Guide

Ethernet cables are used to connect devices to the internet and each other. In this post, we will go through the steps of connecting an ethernet cable to an HP laptop. First, you need to locate the ethernet port on your HP laptop. On most HP laptops, the ethernet port is located on the side. Look for the symbol of three arrows pointing down, up, and down again.

The bottom part of the ethernet port is spring-loaded, so when you insert the ethernet cable, the bottom piece will go downwards to allow the cable to fit in. Be gentle when fitting the ethernet cable as the bottom part is fragile and could break if forced. You don’t want to damage this part because it holds the ethernet cable in place.

To insert the ethernet cable, take one end of the cable and locate the plastic piece on the bottom. This is what holds the cable in place. Press down gently on the spring-loaded part of the ethernet port on the laptop and fit the end of the cable into the port. Push the connector all the way in until you hear it click into place.

Now you need to hook up the other end of the ethernet cable to the router. Most routers have multiple ethernet ports. Plug the other end of the cable into one of the ethernet ports on the router. Look for the yellow bar that says “Internet” on it. The ethernet port above it is where your internet source is coming in. The ethernet ports below it are where you can plug in devices that you want to connect to the internet.

Once you have inserted the ethernet cable into the router, gently push the connector all the way in until you hear it click. This will secure the cable properly.

That’s it! You have successfully connected your HP laptop to the internet using an ethernet cable. We hope this guide was helpful. Remember to be gentle when inserting the ethernet cable as the bottom part of the port is fragile. With these simple steps, you can enjoy a more stable and faster internet connection.


Do HP laptops have an Ethernet port?
HP 2022 New 15 Laptop, 15.6" HD LED Display, Intel Dual-Core Processor, Intel UHD Graphics, 16GB DDR4 RAM, 1TB SSD, Ethernet Port, USB Type-C, Long Battery Life, Windows 11.
How do I enable Ethernet on my HP?
Make sure paper is loaded in the main tray, and then turn on the printer.Remove any plug or protective cover from the Ethernet port on the back of the printer.Connect an Ethernet cable to the printer and an available port on the router.
Can I connect Ethernet directly to laptop?
You can use Ethernet cables even if your laptop does not have an Ethernet port. Some adapters can easily provide Ethernet connection from the USB ports. However, the bandwidth will range according to the USB port generation. Using Ethernet cables is easy and you can connect them without any issue.