How to Set Philips Light Alarm Clock: A Step-by-Step Guide

If you’re in the market for an easy-to-use light alarm clock, the Philips Wakeup Alarm Light Model Number HF3520 might just be what you’re looking for. In this guide, we’ll go over the features and setup of this device, so you can start using it to get a better night’s sleep and wake up feeling refreshed.

The Philips Wakeup Alarm Light has a displayable clock and four touch buttons right below that. The buttons light up when you approach them with your hands, allowing you to select them easily. The buttons are a minus button, a plus button, a menu button, and a select button.

To set the alarm, press the menu button. The first thing that pops up is alarm number one, which will be flashing. Use the select button to adjust the time you want the alarm to go off, and then select the intensity level. The light intensity level 20 is the highest and will go down, so decide how bright you want it to be in the morning. You can also choose whether you want audio with that as well. You can either have it use FM radio, which is built-in to the device or choose from several pre-selected natural or bird type sounds.

The plus button also doubles as a next button. If you press select, you can adjust the second alarm. When you’re setting the alarms in the menu, you don’t turn the alarms on or off in the menu. You only set the times in this settings, and the on and off buttons are hard buttons on the side.

The Philips Wakeup Alarm Light also has a clock, which you can use in 12-hour or 24-hour time, whichever you prefer. You can also adjust the contrast level from one to four.

Moving on to the hard buttons, the first button is alarm button number one. Pressing this button will activate the alarm icon, and you can change the time of the alarm right then and there. If you don’t want to change anything, you can just leave it and the alarm icon shows that the alarm is active. The same goes for alarm number two.

The lamp button turns on the light and slowly comes to whatever brightness you set. You can adjust the brightness with the plus and minus buttons. If you only want it to be really dim for sleeping, you can set it to just kind of a glow.

The middle button is for the FM radio. Pressing it turns on the radio and light off, and you can tune it using the plus and minus buttons. The two buttons on either side of it control the volume. Press the FM radio button again to turn it off.

The last button is the sleep mode button. When you hit it, it activates sleep mode, which is asking you how long you want sleep mode to be. The brightness is adjustable, and it will display the lamp. Over 20 minutes or whatever time you set, the light intensity will decrease until it finally turns off. It’s perfect for those who need help winding down at night.

Overall, the Philips Wakeup Alarm Light is a sleek and easy-to-use device that can help you get a better night’s sleep. While there are some improvements that could be made, such as the ability to interact with it via Bluetooth, it’s still a solid choice for anyone in need of a light alarm clock.