How to Pair a Plantronics Voyager UC Headset to a BT600 USB Dongle

If you own a Plantronics Voyager UC Headset and a BT600 USB Dongle, you’re in luck! Pairing these two devices is incredibly easy. In this guide, we’ll show you how to do it step-by-step.

First, locate the switch on the earpiece of your headset. Flip it up and hold it up for a few seconds. You should see a blinking light on the face of the headset. This indicates that it is in pairing mode.

Next, push down on the USB dongle’s top circle. You can use a pin or a pen to do this. You’ll notice that the dongle starts to flash.

Now, put the headset on and wait for it to connect to the dongle. The headset will give you an indication that it is “PC connected” and that the battery is high. Be sure to charge your headset before attempting this pairing procedure.

If you want to pair your headset with your mobile phone as well, it’s just as simple. Repeat the process by holding the switch up on the earpiece until the light starts to flash, and then find the device on your phone and click “pair”.

If you have any questions or run into any issues, feel free to leave a comment below. Our team responds to every single comment and would be happy to help. And if you found this guide useful, don’t forget to hit the thumbs up button and share it with others who might benefit. Thanks for reading!