If you own a Motorola G Stylus and need to replace a broken component or battery, you’ll need to know how to open the back cover of the phone. In this guide, we’ll show you how to remove the back cover safely and easily.
Before we start, it’s important to note that the back cover is made of plastic, so you need to be careful when applying heat. If you apply too much heat, the plastic could melt. We recommend using a heat gun and applying gentle heat to the back cover.
Here are the steps to follow:
1. Apply some heat to the back cover using a heat gun. Be gentle and don’t apply too much heat.
2. Use a razor blade to make a small gap in the back cover. This will allow you to use a playing card to remove the cover more easily.
3. Use a playing card to gently pry the back cover away from the phone. Be careful not to crack the cover or damage any components.
4. Work your way around the camera, which has a stronger glue. The glue around the camera is stronger, so be careful when removing the back cover from this area.
5. Once you’ve removed the back cover, you’ll see that there is a cable attached to it. Be careful not to damage the cable.
6. Push the cable down and heat it up a little bit to remove it from the back cover.
7. Finally, the fingerprint scanner is attached to the back cover with double-sided tape. Gently remove the scanner from the back cover.
And that’s it! You now know how to safely remove the back cover of your Motorola G Stylus. With this guide, you can easily replace any broken components or battery. Just remember to be patient and gentle when removing the back cover.