If you’re using a projector, you want to make sure that the image quality is as good as possible. Here are some tips to help improve the image quality of your projector.
First, make sure that you place the projector on a flat surface. Then, plug in the power cord and turn on the projector by pressing the power button. Connect your device, such as a laptop, to the projector and tap “s” to enter the interface of input source.
If the screen appears unclear, slightly adjust the focus ring until it becomes clear. Then, select the correct input source. Next, move the projector to the front of a table so that the light of the aperture won’t be blocked. If the projector is too far to the left or right, the picture will be blurred. Move it to the center to ensure that the picture is clear and centered.
If the picture appears trapezoidal, adjust the keystone left or right and then adjust the focus ring as needed. However, if the picture is trapezoidal over 15 degrees, it’s not recommended to use the keystone. Instead, use an object on a tripod stand with a flat surface and a larger size to elevate the projector and project the image higher to make the picture naturally square.
When installing the projector on the ceiling with plus or minus 15 degrees keystone correction angle, avoid tilting the projector too much to make the projector image square. Instead, lower the height of the projector by stretching the universal stain to make the projected image square naturally.
Finally, if the picture still appears unclear, move the projector closer to the wall within effective distance to make the projected screen size smaller and adjust the focus ring accordingly.
Remember, using these tips can help you improve the image quality of your projector, making your viewing experience that much better.