If you’re looking to upgrade your Fitbit Versa 2 with a new band, you’re in the right place. In this post, we’ll show you how to change your Fitbit Versa 2 band quickly and easily.
Before you begin, take a look at your Fitbit watch and notice that there is a natural resting position. You may want to trace this with a pencil so you can remember it later.
Next, remove the bands. You can do this in either the resting or flat position, but it’s usually easier in the flat position. Take the pin and slide it down to pop it out. Repeat this step for the other band.
Now, here’s the trick to putting the bands back on: if you try to do it flat, it’s very difficult if not impossible. Instead, put the watch back up to the natural resting position you noted earlier. Make sure the pin goes in the hole and get it to the same angle as before. Then, press down, slide it in, and wiggle it a little bit. Repeat this step for the other band.
If you find this tutorial helpful, give us a thumbs up and leave a comment down below. And if you want to purchase a new Fitbit strap, you can click the link below to support our website.
Changing your Fitbit Versa 2 band may seem daunting, but it’s actually quite simple once you know the trick. We hope this post has been helpful in guiding you through the process.