How Long Do Cyberpower Batteries Last: A Battery Replacement Guide

If you have a cyber power upc uh battery backup, it’s important to know how long the batteries will last. After several years of use, it’s not uncommon for the batteries to wear out and need replacing. In this guide, we’ll show you how to replace the batteries in your cyber power upc uh battery backup and recommend some cheaper battery options.

Firstly, it’s important to note that leaving your cyber power upc uh battery unplugged for an extended period of time can cause the batteries to wear out faster. If you find that your battery backup won’t power on, it may be a sign that the batteries are toast and need replacing.

Rather than purchasing the expensive name brand cyberpower batteries, you can opt for cheaper universal battery brands available on Amazon. In this guide, we will use the Universal Battery brand.

To replace the batteries, start by taking off the front cover of the battery backup. There’s a little screw on the bottom that needs to be removed, and then the whole front cover should slide off. Inside, you’ll find two batteries that need to be removed. They come with pull tabs, so you can easily slide them out.

The new batteries may need to be matched up with the old ones to ensure they are positioned correctly. They may also be glued together with sticky paper, so take care when removing them. Once the old batteries are removed, insert the new ones in the same position.

Connect the new batteries to the terminals, matching up the positive and negative symbols. The black cable should connect to the black terminal, and the red cable should connect to the red terminal. The yellow terminals should go out through the middle of the tray and connect to the unit itself.

Once the batteries are connected, replace the front cover and screw it back into place. Power on the battery backup to check that everything is working. It should show full capacity.

To test the battery backup, unplug it and plug in a device to see if it can power it. In the video, a Dewalt sander was used as a test device.

In conclusion, replacing the batteries in your cyber power upc uh battery backup is a simple process that can be done with cheaper universal battery brands. Ensure that you match up the positive and negative terminals and test the battery backup with a device to ensure that it’s working correctly.